When you go to buy a stable, you must first determine the size of the stable you need.
Because the tested products are different in the testing opportunities. Therefore, the size of the walkway and stable is something you should pay close attention to. It is available in several sizes: small, small, medium and large.
What is walking in the stable?
The stable foot chamber is used for heat and cold resistance testing in the defences industry, aerospace industry, automotive components, electronics, plastics, chemicals, medicine and related products.
Indoor equipment is stable
It mainly provides a large-scale temperature and humidity environment for large parts, semi-finished products and finished products for the industry. In addition, it is also suitable for testing with large numbers and large volumes.
In addition to the unique structural features of the walking and stability building, we also need to understand its performance characteristics.
A walking stability building plan
With the combination of bookcase sections, the volume inside can be increased in an arbitrary way and it is easy to assemble and assemble. It can be customized and adjusted according to customer needs, which is convenient for customers to follow mobile devices.
SUS #304 stainless steel is adopted in the color plate, the system is strong, the folding is convenient. In addition, the construction is simple, waterproof and beautiful.
A ceiling fan is adopted to reduce the effect of air velocity in the laboratory and samples. At the same time, the requirements of low air speed and high uniformity can be satisfied.
The big bright window has lamps with cracks inside. Therefore, users can see the state in the test room.
Comprehensive safety equipment and power failure protection ensure the safety of the machine itself and the user. A complete safety device, when something bad happens, the control screen will automatically display the fault condition, turn off the light, and provide a troubleshooting method.
Be careful about using the Walk in Stable Room
Finally, there are some things to be aware of when using a walking stick.
When the equipment is in normal operation, the contents of the box should not be out of range. This should not affect the air circulation in the box to ensure the same temperature and humidity in the box.
When there is no need for light in the box, the light will be placed in the “off” position to prolong the life of the lamp.
When the equipment is shipped, it will be installed for 1-2 days. This will help the compressor and refrigeration system to work more efficiently and extend its life.
The wall of the tank wall and the top of the box are cleaned to make it clean and increase the transparency of the glass. Do not wipe the surface with acid, alkali or other corrosive solutions.
The rotation of the equipment during transport must not exceed 45 degrees so as not to damage the cooling system.
Use distilled or purified water when using a humidifier. The converter should have a few drops of water before washing. Then, wash with a soft brush, and then rinse it with clean water.
When the water tank of the humidifier is full of water, the water must be pumped out from the ground so that it is not covered with water.
When the equipment is turned off, if the ground is not good, it must be fixed.
Equipment maintenance and repair must be performed by professionals to avoid accidents.
The device must be connected to the ground power adapter.
